带低音增强的立体声前置放大器电路 (stereo preamplifier with bass-boost)
gh quality, simple design 20 to 30v supply
parts:
p1_________________10k log.potentiometer (dual-gang for stereo)
p2________________100k log.potentiometer (dual-gang for stereo) (see notes)
r1,r2_____________100k 1/4w resistors
r3,r6______________15k 1/4w resistors
r4_________________10k 1/4w resistor
r5_________________22k 1/4w resistor
r7__________________1k 1/4w resistor
r8________________560r 1/4w resistor
c1,c2,c5____________2΅2 63v electrolytic capacitors
c3________________470΅f 35v electrolytic capacitor
c4__________________1΅f 63v polyester capacitor
c6_________________47nf 63v polyester capacitor
c7_________________22΅f 25v electrolytic capacitor
ic1_______________tl072 dual bifet op-amp
sw1________________dpst switch (optional, see notes)
comments:
this preamplifier was designed to cope with cd players, tuners, tape recorders etc., providing a gain of 4, in order to drive less sensitive power amplifiers. as modern hi-fi home equipment is frequently fitted with small loudspeaker cabinets, the bass frequency range is rather sacrificed. this circuit features also a bass-boost, in order to overcome this problem. you can use a variable resistor to set the bass-boost from 0 to a maximum of +16db @ 30hz. if a fixed, maximum boost value is needed, the variable resistor can be omitted and substituted by a switch.
notes:
schematic shows left channel only, but r1, r2, r3 and c1, c2, c3 are common to both channels.
for stereo operation p1, p2 (or sw1), r4, r5, r6, r7, r8 and c4, c5, c6, c7 must be doubled.
numbers in parentheses show ic1 right channel pin connections.
a log type for p2 ensures a more linear regulation of bass-boost.
needing a simple boost-in boost-out operation, p2 must be omitted and sw1 added as shown in the diagram.
for stereo operation sw1 must be a dpst type.
please note that, using sw1, the boost is on when the switch is open, and off when the switch is closed.
technical data (30v supply):
gain @ 1khz: 4
max. input voltage @ 50hz: 500mv rms (280mv rms @ 20v supply)
max. input voltage @ 100hz: 700mv rms (460mv rms @ 20v supply)
max. output voltage: >8v rms (>5v rms @ 20v supply)
max. bass-boost referred to 1khz: 400hz = +2db; 200hz = +5db; 100hz = +10db; 50hz = +14db; 30hz = +16db
total harmonic distortion @ 100hz and 1v rms output: 0.02%
total harmonic distortion @ 1khz and 1v rms output: 0.006%
total harmonic distortion @10khz and 1v rms output: 0.007%
total harmonic distortion @ 100hz and 5v rms output: 0.02%
total harmonic distortion @ 1khz and 5v rms output: 0.0013%
total harmonic distortion @10khz and 5v rms output: 0.005%
current drawing: 2ma
车载显示屏的自动背光调节
5G常用术语和缩略语
【圣诞特辑】2018年的存储圈是什么样?
如何A2B技术和数字麦克风在新兴汽车应用中实现卓越性能
在计算机图形学中GPGPU需要用到的OpenGL概念
带低音增强的立体声前置放大器电路 (Stereo Pream
北斗三号卫星导航定位系统即将建成 目前仅差2颗GEO卫星
5G和无人机的搭配怎样
AI与供应链碰撞,会产生怎样的火花?
欧胜微电子推出最响亮和体积最小的音频中枢芯片WM1811
汽车集中计算平台的软件演进
电池材料之石墨
RTX 4090的实际运行频率和3DMark跑分?
将LCD显示器读数读入单片机的接口电路
了解一下实际Space Station的PFD值
曝索尼PS5将在3月份开启预购 标配版售价499美元
安路科技科创板IPO申请已于4月30日获得受理
一文纵览全球36个AI会议:机器学习十年发展回顾
如何利用3D点编码提升PETRV1/V2及StreamPETR性能
睿思科技发布发布一系列新一代USB Type-C™ 与USB Power Delivery 3.0产品