Negative-to-negative switch-mode converter offers high curre
an external op amp (max4322) enables this switch-mode boost converter (max668) to deliver output currents as high as 4a with efficiencies better than 90%. the op amp enables the circuit to regulate with respect to ground (instead of the -5.2v supply-voltage input), thereby avoiding the effect of input variations on the -3.6v output.
when converting a negative-output power supply to one with higher (less negative) output, one has to ensure that the output voltage is not affected by variations in input voltage. all such supplies include an internal reference voltage that enables regulation of the output voltage, and this reference is usually referred to the most negative rail (ground). thus, the output voltage of such a converter depends on the accuracy of its negative input supply voltage.
the circuit of figure 1 does not have that limitation. delivering output currents as high as 4a with efficiencies better than 90%, it generates a negative output with the help of an op amp and a switch-mode boost converter. closed-loop feedback regulates the output voltage with respect to ground (the most positive rail), which is also the node from which current is delivered to the load.
figure 1. this switch-mode converter generates a regulated negative supply voltage from a higher (more negative) input voltage.
the circuit converts a -5.2v supply voltage to -3.6v. the boost converter (u1) regulates its output voltage to maintain its fb voltage at -3.95v (1.25v above -5.2v). r8 and c8 form a lowpass filter that stabilizes the voltage at fb. you must then select the r4/r6 and r5/r7 pairs to produce the desired output voltage.
making r4 equal to r6, and r5 equal to r7 improves the common-mode performance. the ratio of r4/r5 determines the voltage level at the positive input of the op amp (u2), whose closed-loop configuration ensures that the same voltage appears at its negative input. knowing u2's output voltage (-3.95v) and its negative input voltage lets you determine the output voltage based on the values of r6 and r7: vout = -vref(r6/r7), where vref is the reference voltage of u1 (1.25v nominal), r4 = r6, and r5 = r7.
the component values shown, for example (r5 = r7 = 1.96kω, and r4 = r6 = 5.76kω), produce an output voltage of -3.76v. performance is illustrated by graphs of output voltage vs. output current (figure 2), and efficiency vs. output current (figure 3).
figure 2. output voltage for the figure 1 circuit varies with output current as shown.
figure 3. conversion efficiency for the figure 1 circuit varies with output current as shown.
OPPO依靠5G将为无线VR推TOF技术
交流接触器与床头开关的接线方法
OPPO成时尚年轻人的健身好搭档
工业互联网连什么 热点与难点又是什么
应用于配网项目的TSC系列工业交换机，确保系统数据的快速传输
Negative-to-negative switch-mode converter offers high curre
特性阻抗值控制缘由
15W 1500流明LED灯泡！TESS又一技术突破
AI端的未来到底是在云端还是在边缘端
无电源电焊自动防护面罩作品设计
工业物联网网关可以采集哪些RS485传感器数据并上传到MQTT云平台？
魅族16X和小米8SE对比，看看谁更胜一筹
门禁控制器怎么安装_门禁控制器接线示意图
儒卓力与合力泰科技签署全球分销协议
今年全球半导体市场约5200亿美元，同比降9.4%
SN74LVCH16245ADGGR 16 位收发器介绍
PLC控制系统的6大常见典型部件
反向加法、同相加法及减法运算电路的仿真分析
关于接口测试原理案例分析
温度变送器种类_温度变送器设置哪些参数
when converting a negative-output power supply to one with higher (less negative) output, one has to ensure that the output voltage is not affected by variations in input voltage. all such supplies include an internal reference voltage that enables regulation of the output voltage, and this reference is usually referred to the most negative rail (ground). thus, the output voltage of such a converter depends on the accuracy of its negative input supply voltage.
the circuit of figure 1 does not have that limitation. delivering output currents as high as 4a with efficiencies better than 90%, it generates a negative output with the help of an op amp and a switch-mode boost converter. closed-loop feedback regulates the output voltage with respect to ground (the most positive rail), which is also the node from which current is delivered to the load.
figure 1. this switch-mode converter generates a regulated negative supply voltage from a higher (more negative) input voltage.
the circuit converts a -5.2v supply voltage to -3.6v. the boost converter (u1) regulates its output voltage to maintain its fb voltage at -3.95v (1.25v above -5.2v). r8 and c8 form a lowpass filter that stabilizes the voltage at fb. you must then select the r4/r6 and r5/r7 pairs to produce the desired output voltage.
making r4 equal to r6, and r5 equal to r7 improves the common-mode performance. the ratio of r4/r5 determines the voltage level at the positive input of the op amp (u2), whose closed-loop configuration ensures that the same voltage appears at its negative input. knowing u2's output voltage (-3.95v) and its negative input voltage lets you determine the output voltage based on the values of r6 and r7: vout = -vref(r6/r7), where vref is the reference voltage of u1 (1.25v nominal), r4 = r6, and r5 = r7.
the component values shown, for example (r5 = r7 = 1.96kω, and r4 = r6 = 5.76kω), produce an output voltage of -3.76v. performance is illustrated by graphs of output voltage vs. output current (figure 2), and efficiency vs. output current (figure 3).
figure 2. output voltage for the figure 1 circuit varies with output current as shown.
figure 3. conversion efficiency for the figure 1 circuit varies with output current as shown.
OPPO依靠5G将为无线VR推TOF技术
交流接触器与床头开关的接线方法
OPPO成时尚年轻人的健身好搭档
工业互联网连什么 热点与难点又是什么
应用于配网项目的TSC系列工业交换机，确保系统数据的快速传输
Negative-to-negative switch-mode converter offers high curre
特性阻抗值控制缘由
15W 1500流明LED灯泡！TESS又一技术突破
AI端的未来到底是在云端还是在边缘端
无电源电焊自动防护面罩作品设计
工业物联网网关可以采集哪些RS485传感器数据并上传到MQTT云平台？
魅族16X和小米8SE对比，看看谁更胜一筹
门禁控制器怎么安装_门禁控制器接线示意图
儒卓力与合力泰科技签署全球分销协议
今年全球半导体市场约5200亿美元，同比降9.4%
SN74LVCH16245ADGGR 16 位收发器介绍
PLC控制系统的6大常见典型部件
反向加法、同相加法及减法运算电路的仿真分析
关于接口测试原理案例分析
温度变送器种类_温度变送器设置哪些参数