电池切换电路制3V的系统-Battery-Switchove
abstract: portable systems often require operation from batteries or from a wall adapter. the max8865 low-dropout (ldo) linear regulator is used to provide the switchover function while supplying a regulator 2.84v that can deliver 100ma.
portable systems often offer the flexibility to operate either from an internal battery or from an ac-to-dc wall adapter. many such systems include circuitry that switches automatically between the internal battery and an external source as the user connects and disconnects the wall adapter. the circuit shown in figure 1 implements this idea with a dual linear regulator, one side of which is preset for a 2.84v regulated output. (other versions of the ic offer 2.8v and 3.15v outputs.)
<
figure 1. this linear voltage regulator with automatic-switchover circuitry maintains a 2.84v regulated output as you connect and disconnect the wall-adapter voltage.
the other side of the dual regulator is configured to allow user-adjustable outputs, and in this case monitors the wall-adapter voltage. when you remove that voltage by unplugging the adapter, the regulator's pass transistor routes battery current into the ic to support the 2.84v output. (current flow in this transistor is counter to that of most applications.) the input bypass capacitor (c1) provides enough holdup time for seamless transitions between the battery and adapter voltages.
resistors r1 and r2 sense the wall-adapter voltage and determine the switchover threshold (vsw):
diode d1 isolates the wall-adapter voltage so the battery cannot cause limit cycling by retriggering the switchover. d2 holds the ic's dual mode™ input in external-feedback mode by maintaining a minimum voltage at the set2 input.
battery operation interposes two pass transistors in series between the battery and the regulated output, doubling the regulator's dropout voltage. these transistors each have about 1.1ω on-resistance. to prevent battery current from bleeding through the out2 transistor's intrinsic body diode when operating from the wall adapter, the wall-adapter voltage should be equal to or greater than the maximum battery voltage.
if you turn the regulators on and off with the shutdown inputs active-low shdn1 and active-low shdn2, choose the max8865 rather than the max8866, whose auto-discharge feature will attempt to discharge the battery. as shown, the max8865s with a 5v wall adapter and 3-cell battery provides up to 100ma at 2.84v.
a similar idea appeared in the february 3, 1997 issue of electronic design.
dual mode is a trademark of maxim integrated products, inc.
三大运营商终于支持手机号异地销户服务了
什么是车辆模式管理VMM 车辆模式管理VMM应用分析
41项测试一次过！宁畅八款服务器获Windows Server权威认证
一种带辅助变压器的Flyback变换器ZVS软开关实现方案
【节能学院】安科瑞能耗监测系统在吴忠市回医药基地的研究与应用
电池切换电路制3V的系统-Battery-Switchove
努比亚Z17mini手机评测：双摄实力媲美旗舰
传统以太网是如何工作的呢？传统以太网和时间敏感网络TSN的区别
sed用得少？sed常用语法简介
新唐科技W584B080主板介绍
超轻薄的VR眼镜Pareal VR Glasses正式发布
DSC：一种强大的材料表征技术
Avido发布无线充电电池组 摆脱线缆随走随充
供应链管理系统的优点是怎样的
关于光伏系统损失的发电量的介绍和应用
瞄准3D芯片发展新趋势，Mentor戮力拓展EDA市场版图
智慧园区系统如何建设，规划方案又是怎样的
华大九天依托自身EDA软件平台资源,推出一站式晶圆制造工程服务
锂电池可靠性测试
中国首颗通信能力达10Gbps的民营5G低轨宽带卫星正式开通
portable systems often offer the flexibility to operate either from an internal battery or from an ac-to-dc wall adapter. many such systems include circuitry that switches automatically between the internal battery and an external source as the user connects and disconnects the wall adapter. the circuit shown in figure 1 implements this idea with a dual linear regulator, one side of which is preset for a 2.84v regulated output. (other versions of the ic offer 2.8v and 3.15v outputs.)
<
figure 1. this linear voltage regulator with automatic-switchover circuitry maintains a 2.84v regulated output as you connect and disconnect the wall-adapter voltage.
the other side of the dual regulator is configured to allow user-adjustable outputs, and in this case monitors the wall-adapter voltage. when you remove that voltage by unplugging the adapter, the regulator's pass transistor routes battery current into the ic to support the 2.84v output. (current flow in this transistor is counter to that of most applications.) the input bypass capacitor (c1) provides enough holdup time for seamless transitions between the battery and adapter voltages.
resistors r1 and r2 sense the wall-adapter voltage and determine the switchover threshold (vsw):
diode d1 isolates the wall-adapter voltage so the battery cannot cause limit cycling by retriggering the switchover. d2 holds the ic's dual mode™ input in external-feedback mode by maintaining a minimum voltage at the set2 input.
battery operation interposes two pass transistors in series between the battery and the regulated output, doubling the regulator's dropout voltage. these transistors each have about 1.1ω on-resistance. to prevent battery current from bleeding through the out2 transistor's intrinsic body diode when operating from the wall adapter, the wall-adapter voltage should be equal to or greater than the maximum battery voltage.
if you turn the regulators on and off with the shutdown inputs active-low shdn1 and active-low shdn2, choose the max8865 rather than the max8866, whose auto-discharge feature will attempt to discharge the battery. as shown, the max8865s with a 5v wall adapter and 3-cell battery provides up to 100ma at 2.84v.
a similar idea appeared in the february 3, 1997 issue of electronic design.
dual mode is a trademark of maxim integrated products, inc.
三大运营商终于支持手机号异地销户服务了
什么是车辆模式管理VMM 车辆模式管理VMM应用分析
41项测试一次过！宁畅八款服务器获Windows Server权威认证
一种带辅助变压器的Flyback变换器ZVS软开关实现方案
【节能学院】安科瑞能耗监测系统在吴忠市回医药基地的研究与应用
电池切换电路制3V的系统-Battery-Switchove
努比亚Z17mini手机评测：双摄实力媲美旗舰
传统以太网是如何工作的呢？传统以太网和时间敏感网络TSN的区别
sed用得少？sed常用语法简介
新唐科技W584B080主板介绍
超轻薄的VR眼镜Pareal VR Glasses正式发布
DSC：一种强大的材料表征技术
Avido发布无线充电电池组 摆脱线缆随走随充
供应链管理系统的优点是怎样的
关于光伏系统损失的发电量的介绍和应用
瞄准3D芯片发展新趋势，Mentor戮力拓展EDA市场版图
智慧园区系统如何建设，规划方案又是怎样的
华大九天依托自身EDA软件平台资源,推出一站式晶圆制造工程服务
锂电池可靠性测试
中国首颗通信能力达10Gbps的民营5G低轨宽带卫星正式开通