基于ADP8863设计的带电荷泵驱动的LED驱动技术
adp8863是adi公司的具有先进的自治的led光特性的功1强大的电荷泵驱动器,能独立地驱动多达7个led,每个电流高达30ma,第7个led的驱动电流可高达60ma.电荷泵的自动增益选择有1x,1.5x 和2x,工作电压从2.5 v 到5.5 v,可驱动最大电流240ma,主要用在led指示器,装饰指示照明,键盘照明,rgb led色彩发生和蔼混合以及小型显示器通用照明.本文介绍adp8863主要特性,详细方框图以及多种应用电路.
the adp8863 combines a powerful charge pump driver with advanced autonomous led lighting features. it allows as many as seven leds to be independently driven up to 30 ma (maximum). the seventh led can also be driven to 60 ma (maximum). all leds are programmable for maximum current and fade in/fade out times via the i2c interface.
additionally, automated blinking routines can be independently programmed and enabled for all seven led channels. these leds can also be combined into groups to reduce the processor instructions.
this entire configuration is driven by a two-capacitor charge pump with gains of 1×, 1.5×, and 2×. the charge pump is capable of driving a maximum iout of 240 ma from a supply of 2.5 v to 5.5 v. the device includes a variety of safety features including short-circuit, overvoltage, and overtemperature protection. these features allow easy implementation of a safe and robust design. additionally, input inrush currents are limited via an integrated soft start combined with controlled input-to-output isolation.
the adp8863 is available in a compact lead frame chip scale package (lfcsp).
adp8863主要特性:
automated blinking and funlight timing for each led driver
16 programmable fade in and fade out times
0.1 sec to 5.5 sec
selectable linear, square, or cubic fade rates
7 independent and programmable led drivers
7 drivers capable of 30 ma (maximum)
1 driver also capable of 60 ma (maximum)
programmable maximum current limit (128 levels)
separate and independent controls for backlight leds
backlight fade override
up to two built-in comparator inputs with programmable modes for ambient light sensing
charge pump with automatic gain selection of 1×, 1.5×, and 2× for maximum efficiency
standby mode for <1 μa current consumption
i2c-compatible interface for all programming
dedicated reset pin and built-in power-on reset (por)
short-circuit, overvoltage, and overtemperature protection
internal soft start to limit inrush currents
input-to-output isolation during faults or shutdown
operation down to vin = 2.5 v with undervoltage lockout (uvlo) at vin = 2.0 v
small lead frame chip scale package (lfcsp)
adp8863应用:
led indication
funlight indicator lighting
keypad backlighting
rgb led color generation and mixing
general backlighting of small format displays
图1.adp8863详细方框图
图2.adp8863典型工作电路框图
图3.adp8863采用镇流电阻给led供电方框图
图4.adp8863连接到adp8861,给更多led供电方框图
图5.用于低vf led的另一种应用电路
放射学中使用人工智能来协助图像解释任务的方法正在发展
手机锂电池参数测试中弹片微针模组的作用是什么
CMOS图像传感器CIS技术专利分析
意法半导体新组织架构2月5日生效
关于SRT和NDI®协议在音视频传输中的应用分析
基于ADP8863设计的带电荷泵驱动的LED驱动技术
扁平线圈助推一体成型电感和无线充电发展
我们现在离无碳聚变发电又近了一步
魅族推出氮化镓充电器，1A1C输出功率高达65W
用数字电路做简易AM收音机,AM radio
EXFO的测试技术将如何推进5G网络的部署
关于电动汽车的日常维护问题
在购买时如何选择家庭防盗报警产品，有什么注意事项
汽车电子时代的自动化技术
以继电器电路画出一个简单CPU的电路设计
新能源技术路线困局 氢燃料电池的商业之路
室内定位技术，可通过体验AR平行世界的影音特效、轻松建立分享自己的AR地图
全球芯片业暴跌降价，中国为何还在扩产？
R&S提供全方位行动通讯测试解决方案
一个中国电子元器件干爆小日本的故事
the adp8863 combines a powerful charge pump driver with advanced autonomous led lighting features. it allows as many as seven leds to be independently driven up to 30 ma (maximum). the seventh led can also be driven to 60 ma (maximum). all leds are programmable for maximum current and fade in/fade out times via the i2c interface.
additionally, automated blinking routines can be independently programmed and enabled for all seven led channels. these leds can also be combined into groups to reduce the processor instructions.
this entire configuration is driven by a two-capacitor charge pump with gains of 1×, 1.5×, and 2×. the charge pump is capable of driving a maximum iout of 240 ma from a supply of 2.5 v to 5.5 v. the device includes a variety of safety features including short-circuit, overvoltage, and overtemperature protection. these features allow easy implementation of a safe and robust design. additionally, input inrush currents are limited via an integrated soft start combined with controlled input-to-output isolation.
the adp8863 is available in a compact lead frame chip scale package (lfcsp).
adp8863主要特性:
automated blinking and funlight timing for each led driver
16 programmable fade in and fade out times
0.1 sec to 5.5 sec
selectable linear, square, or cubic fade rates
7 independent and programmable led drivers
7 drivers capable of 30 ma (maximum)
1 driver also capable of 60 ma (maximum)
programmable maximum current limit (128 levels)
separate and independent controls for backlight leds
backlight fade override
up to two built-in comparator inputs with programmable modes for ambient light sensing
charge pump with automatic gain selection of 1×, 1.5×, and 2× for maximum efficiency
standby mode for <1 μa current consumption
i2c-compatible interface for all programming
dedicated reset pin and built-in power-on reset (por)
short-circuit, overvoltage, and overtemperature protection
internal soft start to limit inrush currents
input-to-output isolation during faults or shutdown
operation down to vin = 2.5 v with undervoltage lockout (uvlo) at vin = 2.0 v
small lead frame chip scale package (lfcsp)
adp8863应用:
led indication
funlight indicator lighting
keypad backlighting
rgb led color generation and mixing
general backlighting of small format displays
图1.adp8863详细方框图
图2.adp8863典型工作电路框图
图3.adp8863采用镇流电阻给led供电方框图
图4.adp8863连接到adp8861,给更多led供电方框图
图5.用于低vf led的另一种应用电路
放射学中使用人工智能来协助图像解释任务的方法正在发展
手机锂电池参数测试中弹片微针模组的作用是什么
CMOS图像传感器CIS技术专利分析
意法半导体新组织架构2月5日生效
关于SRT和NDI®协议在音视频传输中的应用分析
基于ADP8863设计的带电荷泵驱动的LED驱动技术
扁平线圈助推一体成型电感和无线充电发展
我们现在离无碳聚变发电又近了一步
魅族推出氮化镓充电器，1A1C输出功率高达65W
用数字电路做简易AM收音机,AM radio
EXFO的测试技术将如何推进5G网络的部署
关于电动汽车的日常维护问题
在购买时如何选择家庭防盗报警产品，有什么注意事项
汽车电子时代的自动化技术
以继电器电路画出一个简单CPU的电路设计
新能源技术路线困局 氢燃料电池的商业之路
室内定位技术，可通过体验AR平行世界的影音特效、轻松建立分享自己的AR地图
全球芯片业暴跌降价，中国为何还在扩产？
R&S提供全方位行动通讯测试解决方案
一个中国电子元器件干爆小日本的故事