abstract: by adding a voltage doubler and voltage inverter, a single 3v or 5v power supply can produce the voltages necessary to improve the performance on a dual voltage analog switch. with the higher power supplies and wider range, the on resistance and timing performance are enhanced.
by adding a single component to a 3v-only or 5v-only board, you can operate conventional cmos analog switches with performance approaching that specified with ±15v supplies. this means fast switching, low on-resistance, cmos/ttl compatibility, low power consumption, and a signal range (±vcc) that exceeds the input supply range (vcc to ground).
simply add a charge-pump voltage converter (ic1), which produces ±2vcc outputs from a vcc input. these unregulated voltages ensure reliable switch operation for vcc levels as low as 3v. logic thresholds for the switch remain unaffected.
figure 1. the charge pump (ic1) provides a local bipolar power supply for the cmos analog switch (ic2).
a vcc of 3v (for instance) produces ±6v rails for the switch (ic2), resulting in on-resistance <30ω w, switching times <200ns, leakage <0.1na, and icc current <0.5ma. raising vcc to 5v produces ±10v rails, resulting in on-resistance <20ω w, switching times <150ns, leakage <0.4na, and icc current <1.3ma.
ic1 can easily power additional switches and/or low-power op amps, but more than a few milliamps of load current degrades performance by lowering the unregulated supply rails.
斩波串级调速系统的工作原理及基于封装技术实现建立仿真模型与研究
使用超声波传感器和Arduino构建一个避障机器人
关键字union的基本定义和使用
卫星轨迹覆盖全球,为何偏远地区仍没有信号
工业物联网有什么用,它需要新建设施吗
Analog Switches Operate With 3
Amazfit智能手表评测 万物互联的入口
华硕灵耀X2Pro开启预售 售价高达29999元人民币
态路小课堂丨浅谈IDC数据中心综合布线第二篇——结构化布线
18键触摸触控芯片VK3618I内部采用特殊的集成电路,具有高电源电压抑制比
锂离子动力电池商用化中应注意的安全问题及解决方法
诺基亚8跳水!别把情怀当饭吃
英特尔瞄准数据中心 2019年高达100TB的SSD不是梦
宁畅参展英特尔互联网峰会 “定制服务器”助快速构建全栈云服务
一文解析Redis读写分离技术
MG216蓝牙芯片适用于低功耗蓝牙信标
太过强悍!搭载A10X Fusion处理器的10.5寸iPad Pro跑分曝光
一种通用型集成运算放大器知识浅析
勤哲Excel服务器无代码实现数字化共享管理平台
谷歌Pixel3或添加薄荷绿色配色