Low-Cost Sample/Hold Includes
properly connected, a quad-spdt analog switch and op amp (figure 1 form a sample/hold circuit. the circuit economizes during operation by switching the op amp from input to output, thereby buffering the input (vin) during sample mode and buffering the hold capacitor (ch) during hold mode.
figure 1. this quad analog switch and general-purpose op amp from a low-cost sample/hold suitable for moderate-speed aplications.
the two digital inputs are compatible with ttl and cmos logic levels. input command active-low s/h controls the operating mode (low is sample), and disch is an optional control input whose low state commands a rapid and complete discharge of ch. figure 2 provides a simplified functional diagram of the circuit.
figure 2. a simplified version of figure 1 illustrates how the analog switches shift the op amp from the role of input buffer to that of an output hold-capacitor buffer.
a general-purpose op amp is suitable for ic1, provided the input bias current is acceptable (bias current usually dominates the hold-mode droop rate). ch can range from 100pf to 0.1µf. in driving such a capacitive load, most op amps will oscillate without an isolating resistor (r1) of 100 to 200ω within the feedback loop. using components as shown in figure 1, the typical circuit performance includes: droop rate ≤ 100mv/sec, aperture time ≤ 100nsec, offset voltage ≤ 5mv, output charge injection ≤ 25pc, an acquisition time ≤ 1µsec (for ±10% accuracy) or ≤ 5µsec (for ±0.1% accuracy)
performance is about the same for ±15v or ±12v supplies, and the system also work well on a unipolar supply of 10 to 30v. whatever the supply configuration, the op amp's common-mode range restricts vin to about 2v less than the supply rails. the control inputs' ttl/cmos switching thresholds (0.8v max, 2.4v min) remain constant regardless of supply levels
野村证券：明年新iPhone将增加AR功能，外观将不会有大改变
华为打造融合DOICT技术打造工业级5G网络底座
为什么手机电池寿命越用越短
UPS电气常见问题大全
拓林思软件助力大唐电信提升SCDMA竞争能力
Low-Cost Sample/Hold Includes
知道物联网设备在哪里真的很重要吗？
海速芯低功耗8位MCU TM52FN8276在远程无线联网报警系统中的应用
如何使用VOC气体检测仪进行数据采集，有什么步骤和方法
TH2840在高速测试领域的应用
勇敢出发，安全回家，览邦F9 FreeBuds Plus多模式降噪耳机大师之作
三大运营商5G基站的建设规划解析
国际学术研讨会引发本土滤波器厂商躺枪波澜——忽视专利与无限内斗均会扼杀中国芯片走向高端
一款HI-FI电子管功率放大器电路原理图
锂电池生产相关知识
新一代健康听音设备，南卡发布年度旗舰骨传导耳机
废旧电池应有偿回收
华为发布Vision系列智慧屏
江铃汽车2023年销售汽车31万辆，同比增长9.93%
PLC控制系统中的可靠性和抗干扰技术研究
figure 1. this quad analog switch and general-purpose op amp from a low-cost sample/hold suitable for moderate-speed aplications.
the two digital inputs are compatible with ttl and cmos logic levels. input command active-low s/h controls the operating mode (low is sample), and disch is an optional control input whose low state commands a rapid and complete discharge of ch. figure 2 provides a simplified functional diagram of the circuit.
figure 2. a simplified version of figure 1 illustrates how the analog switches shift the op amp from the role of input buffer to that of an output hold-capacitor buffer.
a general-purpose op amp is suitable for ic1, provided the input bias current is acceptable (bias current usually dominates the hold-mode droop rate). ch can range from 100pf to 0.1µf. in driving such a capacitive load, most op amps will oscillate without an isolating resistor (r1) of 100 to 200ω within the feedback loop. using components as shown in figure 1, the typical circuit performance includes: droop rate ≤ 100mv/sec, aperture time ≤ 100nsec, offset voltage ≤ 5mv, output charge injection ≤ 25pc, an acquisition time ≤ 1µsec (for ±10% accuracy) or ≤ 5µsec (for ±0.1% accuracy)
performance is about the same for ±15v or ±12v supplies, and the system also work well on a unipolar supply of 10 to 30v. whatever the supply configuration, the op amp's common-mode range restricts vin to about 2v less than the supply rails. the control inputs' ttl/cmos switching thresholds (0.8v max, 2.4v min) remain constant regardless of supply levels
野村证券：明年新iPhone将增加AR功能，外观将不会有大改变
华为打造融合DOICT技术打造工业级5G网络底座
为什么手机电池寿命越用越短
UPS电气常见问题大全
拓林思软件助力大唐电信提升SCDMA竞争能力
Low-Cost Sample/Hold Includes
知道物联网设备在哪里真的很重要吗？
海速芯低功耗8位MCU TM52FN8276在远程无线联网报警系统中的应用
如何使用VOC气体检测仪进行数据采集，有什么步骤和方法
TH2840在高速测试领域的应用
勇敢出发，安全回家，览邦F9 FreeBuds Plus多模式降噪耳机大师之作
三大运营商5G基站的建设规划解析
国际学术研讨会引发本土滤波器厂商躺枪波澜——忽视专利与无限内斗均会扼杀中国芯片走向高端
一款HI-FI电子管功率放大器电路原理图
锂电池生产相关知识
新一代健康听音设备，南卡发布年度旗舰骨传导耳机
废旧电池应有偿回收
华为发布Vision系列智慧屏
江铃汽车2023年销售汽车31万辆，同比增长9.93%
PLC控制系统中的可靠性和抗干扰技术研究