TI公司的汽车信息娱乐电源系统参考设计
ti公司的pmp15014是汽车信息娱乐电源系统参考设计,采用一级功率系统满足高输入电压的需求,并提供不同负载的低压多个输出,还提供瞬态和极性相反保护,工作频率2.1mhz,以避开am频段,具有优异的emi性能.参考设备选用lm53625-q1/lm53635-q1同步降压稳压器.本文介绍了lm53625-q1/lm53635-q1主要特性,功能框图,lm53635通用应用电路图和几种典型应用电路,以及汽车信息娱乐电源系统pmp15014主要特性,电路图,材料清单和pcb设计图.
the lm53625-q1/lm53635-q1 synchronous buck regulator is optimized for automotive applications， providing an output voltage of 5 v， 3.3 v， or an adjustable output. advanced high-speed circuitry allows the lm53625-q1/lm53635-q1 to regulate from an input of 18 v to an output of 3.3 v at a fixed frequency of 2.1 mhz. innovative architecture allows this device to regulate a 3.3-v output from an input voltage of only 3.55 v. all aspects of the lm53625-q1/lm53635-q1 are optimized for automotive and performance-driven industrial customers. an input voltage range up to 36 v， with transient tolerance up to 42 v， eases input surge protection design. the automotive-qualified hotrod qfn package with wettable flanks reduces parasitic inductance and resistance while increasing efficiency， minimizing switch node ringing， and dramatically lowering electromagnetic interference （emi）。 an open-drain reset output， with built-in filtering and delay， provides a true indication of system status. this feature negates the requirement for an additional supervisory component， saving cost and board space. seamless transition between pwm and pfm modes and low quiescent current （only 15 µa for the 3.3 v option） ensure high efficiency and superior transient responses at all loads.
lm53625-q1/lm53635-q1主要特性：
aec-q100 automotive qualified：
device temperature grade 1： –40℃ to +125℃ ambient operating temperature range
device hbm classification level 2
device cdm classification level c6
–40℃ to +150℃ junction temperature range
15-µa quiescent current at no load （typical） with 3.3-v output
4 mm × 5 mm， 0.5-mm pitch vqfn package withwettable flanks and 0.6-mm vin spacing
low emi and switch noise
spread spectrum option
external frequency synchronization
reset output with internal filter and 3-ms release timer
pin-selectable forced pwm mode
built-in compensation， soft start， current limit， thermal shutdown， and uvlo
0.6-v dropout at 3.5 a at 105℃ ta
±1% output voltage tolerance （–40℃ to 125℃ tj）
available with fixed 5-v， 3.3-v or adjustable output
图1.lm53625-q1/lm53635-q1功能框图
图2.lm53635通用应用电路图
图3.lm53635固定5v/3.5a输出电源电路图
图4.lm53635固定3.3v/3.5a输出电源电路图
图5.lm53635 6v输出电源电路图
汽车信息娱乐电源系统pmp15014
this solution is designed to be an automotive off-battery front end power supply for infotainment systems. it was created using a one stage power system meeting high voltage input needs and providing low voltage for multi output rails for different load needs. the system also provides transient and reverse polarity protection. the wide vin buck stage is working at 2.1mhz to avoid am band and has superior emi performance with an differential emi filter to support cisper 25.
图6.汽车信息娱乐电源系统pmp15014外形图
汽车信息娱乐电源系统pmp15014主要特性：
wide vin 2.1mhz integrated ， low iq buck converter
boost for 5v can supply
transient and reverse polarity protection and emi filter added
the system disconnet the second stage power and keep 3.3v sustained when input votlage lower than 4.5v
图7.汽车信息娱乐电源系统pmp15014电路图
汽车信息娱乐电源系统pmp15014材料清单:
图8.pmp15014 pcb设计图(1)
图9.pmp15014 pcb设计图(2)
图10.pmp15014 pcb设计图(3)
图11.pmp15014 pcb设计图(4)
图12.pmp15014 pcb设计图(5)
图13.pmp15014 pcb设计图(6)
图14.pmp15014 pcb设计图(7)
图15.pmp15014 pcb设计图(8)
图16.pmp15014 pcb设计图(9)
红外热成像仪简介与工作原理
多媒体梦工厂：华为多媒体管线服务AV Pipeline Kit究竟是什么？
IR推出IRS2538DS控制IC电感镇流器替代方案
双模硬件验证系统来了！深度解析芯华章桦捷HuaPro P2E六大核心亮点
IDE数据传输模式
TI公司的汽车信息娱乐电源系统参考设计
基于红外反射式光电传感器的智能循迹小车
多路端口可编程霓虹灯及彩灯控制器
荷兰台夫特理工大学研究出，以三氧化钨薄层制作的新型传感器
人工智能与人为监督相结合 可以为下一代数据中心创造一系列新的效率
基于面向对象程序切片的软件度量
对话Moka李国兴：大模型改造SaaS需要持续渐进式创新，先发者把握先机
配电网的特点 配电网的特点
工业交换机的设置步骤，您知道吗？
苹果全新的iPad Pro信息曝光 能否继续辉煌？已经开始量产但发售要推迟
音圈电机无人机迎接神舟十二号载人飞船回家
MACsec车载应用技术解读
关于Cortex-A8处理器性能及架构解析
引领RISC-V处理器性能 赛昉科技斩获年度技术突破IP公司奖
荣耀FlyPodsPro怎么样 到底值不值得买
the lm53625-q1/lm53635-q1 synchronous buck regulator is optimized for automotive applications， providing an output voltage of 5 v， 3.3 v， or an adjustable output. advanced high-speed circuitry allows the lm53625-q1/lm53635-q1 to regulate from an input of 18 v to an output of 3.3 v at a fixed frequency of 2.1 mhz. innovative architecture allows this device to regulate a 3.3-v output from an input voltage of only 3.55 v. all aspects of the lm53625-q1/lm53635-q1 are optimized for automotive and performance-driven industrial customers. an input voltage range up to 36 v， with transient tolerance up to 42 v， eases input surge protection design. the automotive-qualified hotrod qfn package with wettable flanks reduces parasitic inductance and resistance while increasing efficiency， minimizing switch node ringing， and dramatically lowering electromagnetic interference （emi）。 an open-drain reset output， with built-in filtering and delay， provides a true indication of system status. this feature negates the requirement for an additional supervisory component， saving cost and board space. seamless transition between pwm and pfm modes and low quiescent current （only 15 µa for the 3.3 v option） ensure high efficiency and superior transient responses at all loads.
lm53625-q1/lm53635-q1主要特性：
aec-q100 automotive qualified：
device temperature grade 1： –40℃ to +125℃ ambient operating temperature range
device hbm classification level 2
device cdm classification level c6
–40℃ to +150℃ junction temperature range
15-µa quiescent current at no load （typical） with 3.3-v output
4 mm × 5 mm， 0.5-mm pitch vqfn package withwettable flanks and 0.6-mm vin spacing
low emi and switch noise
spread spectrum option
external frequency synchronization
reset output with internal filter and 3-ms release timer
pin-selectable forced pwm mode
built-in compensation， soft start， current limit， thermal shutdown， and uvlo
0.6-v dropout at 3.5 a at 105℃ ta
±1% output voltage tolerance （–40℃ to 125℃ tj）
available with fixed 5-v， 3.3-v or adjustable output
图1.lm53625-q1/lm53635-q1功能框图
图2.lm53635通用应用电路图
图3.lm53635固定5v/3.5a输出电源电路图
图4.lm53635固定3.3v/3.5a输出电源电路图
图5.lm53635 6v输出电源电路图
汽车信息娱乐电源系统pmp15014
this solution is designed to be an automotive off-battery front end power supply for infotainment systems. it was created using a one stage power system meeting high voltage input needs and providing low voltage for multi output rails for different load needs. the system also provides transient and reverse polarity protection. the wide vin buck stage is working at 2.1mhz to avoid am band and has superior emi performance with an differential emi filter to support cisper 25.
图6.汽车信息娱乐电源系统pmp15014外形图
汽车信息娱乐电源系统pmp15014主要特性：
wide vin 2.1mhz integrated ， low iq buck converter
boost for 5v can supply
transient and reverse polarity protection and emi filter added
the system disconnet the second stage power and keep 3.3v sustained when input votlage lower than 4.5v
图7.汽车信息娱乐电源系统pmp15014电路图
汽车信息娱乐电源系统pmp15014材料清单:
图8.pmp15014 pcb设计图(1)
图9.pmp15014 pcb设计图(2)
图10.pmp15014 pcb设计图(3)
图11.pmp15014 pcb设计图(4)
图12.pmp15014 pcb设计图(5)
图13.pmp15014 pcb设计图(6)
图14.pmp15014 pcb设计图(7)
图15.pmp15014 pcb设计图(8)
图16.pmp15014 pcb设计图(9)
红外热成像仪简介与工作原理
多媒体梦工厂：华为多媒体管线服务AV Pipeline Kit究竟是什么？
IR推出IRS2538DS控制IC电感镇流器替代方案
双模硬件验证系统来了！深度解析芯华章桦捷HuaPro P2E六大核心亮点
IDE数据传输模式
TI公司的汽车信息娱乐电源系统参考设计
基于红外反射式光电传感器的智能循迹小车
多路端口可编程霓虹灯及彩灯控制器
荷兰台夫特理工大学研究出，以三氧化钨薄层制作的新型传感器
人工智能与人为监督相结合 可以为下一代数据中心创造一系列新的效率
基于面向对象程序切片的软件度量
对话Moka李国兴：大模型改造SaaS需要持续渐进式创新，先发者把握先机
配电网的特点 配电网的特点
工业交换机的设置步骤，您知道吗？
苹果全新的iPad Pro信息曝光 能否继续辉煌？已经开始量产但发售要推迟
音圈电机无人机迎接神舟十二号载人飞船回家
MACsec车载应用技术解读
关于Cortex-A8处理器性能及架构解析
引领RISC-V处理器性能 赛昉科技斩获年度技术突破IP公司奖
荣耀FlyPodsPro怎么样 到底值不值得买