MAX16820典型应用电路图

for several leds in series, the sum of their vf voltages can go to 40v or more, and if not referenced to ground, that vf sum requires a differential measurement. as a third challenge (in addition to high voltage and differential measurement), hbleds are often dimmed using pulse-width modulation (pwm). if so, you can't measure vf during the low portion of the pwm duty cycle, when the leds are not illuminated and vf is not present. for a hysteretic buck led driver (max16820) driving three leds in series (figure 1), you must measure the anode and cathode voltages of the string when dim is high.
figure 1. standard driver circuit for hb leds.
to avoid the need for a differential high-voltage measurement, you can take the indirect approach of measuring the duty cycle at the drv pin. for this particular led driver, a first-order estimate of forward voltage for the led string is vf = d × vin, where d represents an internal duty cycle produced in the ic's switchmode section (not to be confused with the duty cycle at dim). the drv signal is referenced to ground and limited to vcc (5v). that condition allows the use of low voltage adcs or comparators, which in turn can be powered by the led driver's vcc output (10ma maximum).
结构函数的由来及推导过程
如何提高固网家宽的品质
被动元件这波缺货是结构改变估计要到2019年
S7-200 SMART系列控制系统,在QT10砖机自动生产中的应用设计
指纹识别的DSP实现方案
MAX16820典型应用电路图
联创特种微电子与南昌大学举行实习暨就业基地签约仪式
微生物定量检测仪的特点有哪些
关于晶体硅太阳能电池单面湿法化学抛光的方法
电线电缆选型时的注意事项都有哪些
Autodesk Vault在变压器三维设计中的应用
Congruity360利用AI提高风险评估过程的速度和精度
功率放大器在声波截面梯度场的重建及其在声波场处理中的应用
C&K PT系列密封电源钮子开关的双极选项
iOS10.2又出问题了?有用户表示会随意开启自动关机模式
电动机噪声大或声音异常故障原因及解决方法
5G、电动汽车、智慧医疗等应用不可或缺,导电油墨技术及市场趋势
基于单片机的太阳自动跟踪系统的研究
快充协议24V转5V车载充电器芯片
动态改变DC-DC反馈电阻,调整输出电压